HOBBYWING Pentium 80A Electric Speed Controller

HOBBYWING Pentium 80A Electric Speed Controller

Product Feature
-Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
-Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
-Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to its default setting.
-Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection.

Advantages
-Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
- Extreme low resistance PCB is used at power output section to get the best current endurance capability.
- Big heat sink has a very good cooling effect.
- Microprocessor uses separate voltage regulator IC, with good anti-jamming capability
- Compatible with Hobbywing's Program Card.
- Intellectual property rights of our own.

Specification
-Output: Continuous 80A, Burst 100A up to 10 Secs.
-Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery.
- BEC: 3A / 5V (Switch mode).
-Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM (BLM: Brushless Motor)
-Product Size: 70 x 31 x 14mm
- Product Weight: 62g.

More HobbyWing Items on http://www.hobbyhot.com/hobbywing-m-3.html